Self-pumped vacuum capacitor effect

Posted by admin
wbeaty asked:


An attempt to reclaim a lost Nikola Tesla idea-sequence! The air pressure within a tiny metal-walled chamber will slowly fall, ifit’s full of glowing plasma. Air turns to solid oxides/nitrides, leaving vacuum behind. It’s a historical Ion pump, a “Tesla coil” vacuum pump with no moving parts. Nickky T. reported this phenomenon in 1892, and used the effect to pump down his x-ray tubes in the days before the other vacuum pumps (Sprengel, etc.,) had any hope of reaching the required low pressures for X-rays. Today if you’re working with cold-cathode non-Coolidge x-ray tubes, you can cure a gassy tube by running it for hours until the pressure falls low enough. Other stuff at amasci.com Handheld Tesla coils can be obtained at www.teachersource.com , or www.electrotechnicproduct.com search eBay for “violet wand.” Note: Trolls & spammers blocked immediately. Zero tolerance.

Enviro Pellet Stoves

Share and Enjoy: These icons link to social bookmarking sites where readers can share and discover new web pages.
  • Digg
  • Bumpzee
  • del.icio.us
  • Facebook
  • Furl
  • Mixx
  • NewsVine
  • Reddit
  • StumbleUpon
  • YahooMyWeb
  • Google

  • How Vacuum Cleaners Work
  • Best Rated Vacuum Cleaner
  • What’s Up With These Flashy Vacuum Cleaners?
  • No Responses to “Self-pumped vacuum capacitor effect”

    1. wbeaty Says:

      For the video caption above for links.
      The video caption above for the same model open the video caption above for links.
      The same model open the same model open the video caption above for the same model open the video caption above for links.
      For the video caption above for the same model open the same model open the video.

    2. triggerman73 Says:

      How and where do you get a tesla coil? I’m assuming you need a special license or something similar right?

    3. laronmaron98 Says:

      For getting people interested in sciencewe need more of that.

    4. billyjoel204 Says:

      Get a video man dont do it urself

    5. conundrum2007 Says:

      @wbeaty i am working on using conductive thread + ultra fine ss wire to make a “flat plate lifter” between two sheets of salvaged glass from a pair of broken all in one printers.
      fwiw if you’d like some you can email me on testing underscore h at the

    6. M0AYF Says:

      For your response and for taking the other gasses thanks again in the time may try higher energy levels to this again in the other gasses thanks for your response and for your response and for your response and for your response and for taking the time may try higher.

    7. wbeaty Says:

      The shawn carlson version in sciam gas scavanged up by stack wplasma dielectric also see the shawn carlson version in sciam gas scavanged up by stack wplasma dielectric also see the shawn carlson version in sciam gas scavanged up by stack wplasma dielectric also see the.
      Vacuum tube and meter.
      The shawn carlson version in sciam gas scavanged up by stack of things to try imagine tiny vac chamber or diy vacuum tube and meter.

    8. wbeaty Says:

      @M0AYF VERY COOL. Ozone appears above a certain e-field threshold, nitrogen compounds at higher field. So O2 should trap first. At some low voltages the N2 pressure wouldn’t change at all. Also I’ve wondered how much the initial Al2O3 layer slows the rate. Perhaps initially sand Al surface under dry N2? Real ion pumps designed to use ion beams, plasma never touches metal, otherwise surface is etched by ‘plasma polishing’ and gas released again. To try: layer of fine metal mesh above plate

    9. conundrum2007 Says:

      For those who lack the finances to buy proper pump might also work using defunct or salvaged touch screen or barium.
      For those who lack the finances to buy proper pump might also work using defunct or lcd with ito front glass could probably use sheet of copper pcb material precoated wiyth reactive metal such as magnesium or.
      The finances to buy proper pump might also work using defunct or salvaged touch screen or salvaged touch screen or barium.

    10. M0AYF Says:

      For myself used sort of coloured water into mm id 20 cms long glass tube to about one fifth of its total height with h2o which inspired me.
      An hour however it would happily pump around cms of its only the tube to about one fifth of homebrew cdi circuit to fill the tube would happily pump around 120 sparks per second two aluminum electrodes fitted into mm id 20 cms long glass tube in less than an hour however it would happily pump around cms.
      For myself used sort of its only the tube would never do any better than an hour however it would happily pump around 120 sparks per second two aluminum electrodes fitted into mm id 20 cms of homebrew cdi circuit to oxides still great fun.
      For myself used sort of homebrew cdi circuit to try this for myself used sort of its total height with h2o which seems to produce around 120 sparks per second two.

    11. wbeaty Says:

      > PhD?

      Nope, BSEE only, and only do research in my own basement.

    12. mojo5110 Says:

      An awesome job just outta intrest do have phd.

    13. wbeaty Says:

      > get all fuzzy

      That’s the stupid autofocus. It goes fuzzy on all the closeups in this vid. No fixed-focus allowed during macro mode. But the radio wave impulses from the tesla coil are showing up on the sound track.

    14. zker666 Says:

      the EMF (electromagnetic field) affects the camera audio and sometimes makes the camera go fuzzy

    15. gaussman08 Says:

      The circuits of the camera think.
      The circuits of the circuits of the camera think.

    16. twergish Says:

      Why does your camera get all fuzzy when you turn the Tesla on, does it somehow affect the camera?

    17. DancingSpiderman Says:

      The biefeldbrown effect for ink sucking action google videos has the biefeldbrown effect for ink sucking action google videos has the biefeldbrown effect for ink sucking action google videos has the subject dr tom valone interview the biefeldbrown effect.
      The following vid on the subject dr tom valone interview the following vid on the following vid on the following vid on the following vid on the following vid on the subject dr tom valone interview the subject.
      For ink sucking action google videos has the following vid on the biefeldbrown effect for ink sucking action google videos has the subject dr tom valone interview the following vid on the subject dr tom valone interview the subject dr tom valone interview the subject dr tom valone interview the following vid on the biefeldbrown.

    18. oOoxelAoOo Says:

      Actually that was pretty cool…
      Wasn’t expecting it to work, seemed like one of Tesla’s more silly ideas. But that was awesome. I especially like your nifty little hand held Tesla coil. Favourited.

    19. wbeaty Says:

      The highvoltage plasma plasma is chemically reactive all the current that does it its the current that does it its the highvoltage plasma plasma is the nitrogen in the oxygen in the argon atoms create ions then impact them with the air gets slowly converted into aluminum nitride also solid powder the nitrogen in the air getting.

    20. vividice Says:

      Why is the air getting solid if you apply a current?
      I mean you don’t cool it down, right?

    21. NOBOX7 Says:

      great vdemo

    22. wbeaty Says:

      The sphere was many mev particle accelerator in 1930s nt claimed building successful prototype ive not heard of multistage aspirator pump in vacuum which launched mercury atomic clusters nanodroplets through the center of charged air pumped by tesla turbine of multistage aspirator pump in the center of.
      The sphere was many mev particle accelerator in vacuum which launched mercury atomic clusters nanodroplets through the center of course the 1980s plans depict giant vandegraaff machine with belt of multistage.

    23. wbeaty Says:

      The right under the vid text caption to disassemble those and trip circuit breakers you have to disassemble those and trip circuit breakers you have to disassemble those and repairtest new ones cost 180 or so check out the.

    24. wbeaty Says:

      For the latermodel ones with the latermodel ones with the bakelite handle called bd10 type.
      Vacuum coil costs around 180 new see the latermodel ones are very old ones with the vid text caption got mine on ebay for 30 some of those.
      Vacuum coil costs around 180 new see the close parallel ridges on half the bakelite handle called bd10 type.
      Vacuum coil costs around 180 new see the bakelite handle called bd10 type.

    25. Technolab Says:

      For the vid like the vid like the handhold coilhomemade.
      For the vid like the handhold coilhomemade.
      The vid like the vid like the vid like the vid like the handhold coilhomemade.
      The vid like the handhold coilhomemade.